HydroShield STONE ENHANCER is a solvent based polymer combination that when applied on stone surfaces rejuvenates the color and appearance by penetrating into the stone. It is also a penetrating sealer that adds stain protection to the stone. The Enhancer is colorless and clear. It has no strong odor.

Uses

For both indoors and outdoors HydroShield STONE ENHANCER is designed for the color enhancement of tumbled marble, flamed granite, slate, clay tile, sandstone, and other porous stone that have faded or been worn.

Preperation

Stone surface should be clean, dry, and free of waxes or other surface coatings. New cement and grout joints should be allowed to fully dry prior to application.

Application

Due to differences in the structure and chemical nature of different stones, always test HydroShield STONE ENHANCER in a small inconspicuous area to determine the effect for your particular use. Apply HydroShield STONE ENHANCER in an even and generous layer onto the stone surface with a new clean brush, lambs wool applicator, a dense sponge or a paint roller. Allow to soak and cure on the surface for at least 4 hours or overnight if possible. If any oily residue remains on the surface, buff dry with a clean cloth. If color enhancement is uneven, reapply the ENHANCER. HydroShield COLOR ENHANCER cures fully over a 24 hour period.

Coverage

200 to 800 square feet per gallon*

*coverage highly dependent on porosity of stone.